Post Offer Free
Guangzhou Baoyue Electromechanical Equipment Co.ltd  

Gold Index: 5804

You are here: home  > Coated Panel Car Spray Booth Air Flow Electric Controlled With Heat Recovery System

Coated Panel Car Spray Booth Air Flow Electric Controlled With Heat Recovery System 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: BY-8

Coated Panel Car Spray Booth Air Flow Electric Controlled With Heat Recovery System<span style="fon

Coated Panel Car Spray Booth Air Flow Electric Controlled With Heat Recovery System

 

 

Features

 

1. With heat recuperation system, energy save and more efficiency.

2. 0.6mm coated steel with rock wool inside for wall panel.

3. Quality brand name turbo fans, directly drive type

4. Riello RG5S diesel burner with a heating productivity of 260000Kcal/h

5. Pneumatic damper for spraying to baking cycle.

6. Double layer heat exchanger.

7. Siemens motors.

8. Electric damper for intake and exhaust, control the air flow.

 

 

Advantage

 

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,

symmetrical and steady-going down airflow for spraying,After painting, Hot air goes from heating

generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. In the meantime, heat recuperation system start working,energy save and temperature raise fast. Afterwards, the air with little benzene will be released to the atmosphere after being filtered twice by the exhaust air filter.

 

Item Detailed Specification
Inside dimension 7000×4000×2800 mm (L×W×H)
Outside dimension 7120×5520×3750mm (L×W×H)
Front door Folding door, 3 folds, 3000×2750 mm (W×H), without frame, square window frame, orange colour, door head and two batten on both sides white colour, with safety escape door lock.
Emergency door 1 units, 800×2000mm (W×H), colour: white, with safety escape door lock.
Basement Galvanized steel assemble, 350mm high, galvanized steel bending support, full grilles made by flat bar 30×5 and twisted steel, galvanized, 3 ramps, 900×2500mm/pc, silver colour.
Wall panel Thickness: 60mm, both sides covered by coated steel, thickness 0.6mm, with rock wool inside, colour: white.
Light Ceiling Lights: 8Units×4Pcs=32Pcs×36W, both sides lights: 7Units×4Pcs=28Pcs×36W, back side lights: 4Units×4Pcs=16Pcs×36W, LED light tube.
Generator cabinet Intake from back upper, exhaust from rear upper, galvanized steel frame; white powder coated panel covered, filled with heat preservation material PU inside.
Intake and Exhaust system Inlet: 1×7.5KW turbo fan, Siemens motor, air capacity for each fan: 25000m3/h, electric damper.
Outlet: 1×7.5KW turbo fan, Siemens motor, air capacity for each fan: 25000m3/h, electric damper.
Heating system Italy RIELLO RG5S diesel burner, double layer stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 260000kcal/h, with heat recovery system.
Purification system Pre-filter (pocket type), ceiling filter, fibreglass filter, activated carbon filter (pocket type)
Roof 50mm rock wool panel.
Control system Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, pressure gauge, all motors reduced-voltage starting.
Total power 17KW (Power supply 1×220V, 3×380V, 50HZ)

 

 

bigPhoto
 Mr. Mr. Allan

Tel: 86-20-66806679
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Related Products

Company Info

Guangzhou Baoyue Electromechanical Equipment Co.ltd [China (Mainland)]


Business Type:Manufacturer
City: Guangzhou
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (114)