Workshop Full Down Draft Infrared Paint Booth Combined Prep Station Energy Saving BY-1 non standard and BY-10 manufacturer from China Guangzhou Baoyue Electromechanical Equipment Co.ltd

Workshop Full Down Draft Infrared Paint Booth Combined Prep Station Energy Saving

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: BY-1 non standard and BY-10

Workshop Full Down Draft Infrared Paint Booth Combined Prep Station Energy Saving

<span st

Workshop Full Down Draft Infrared Paint Booth Combined Prep Station Energy Saving

Features:

1, Spray booth: 5.5KW turbo fan for intake, 5.5KW turbo fan for extraction.

2, Prep station: 5.5KW turbo fan for intake and exhaust.

3. Air units at back side.

4, Two sets booth side by side.

5, All LED lights, energy save and more illumination.

6, Color white, blue, orange and red is optional.

7, Down draft and rear side draft.

Advantage:

Special for the 4S body shop, continue line if needed, air flow from back side, intake and suction units from complete basement, down draft, two units side by side, option for the electric shutter door between two booth, and rail on the floor, car moveable from one booth to another. Specification as below for one unit only.

Spray booth:

Item	Detailed Specification
Inside dimension	6900×3900×2650 mm (L×W×H)
Outside dimension	8350×4000×3400mm (L×W×H)
Front door	Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, blue colour, door head and two batten on both sides white colour.
Emergency door	1 units, 650×1800mm (W×H), colour: white.
Basement	Galvanized steel assemble, 300mm high, quadrate steel support, two lines grilles made by flat bar and twisted steel, full ramps.
Wall panel	Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×16W, side lights option, with LED, lighting boxes are powered coated, illumination ≥1000LUX
Generator cabinet	Intake from back upper, exhaust from rear upper, galvanized steel frame; blue machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system	Inlet:1×5.5KW turbo fan, air capacity for each fan: 18000m³/h.
Intake and Exhaust system	Outlet: 1×5.5KW turbo fan, air capacity for each fan: 18000m3/h. Manual damper, 4m ducts, 1 pcs 90⁰ bend, 1 pcs 30⁰ bend.
Heating	8 sets infrared heating, 3kw/set, 1kw/pcs, total 24kw.
Filtering system	Pre-filter, ceiling filter, fibreglass filter, activated carbon filter.
Roof	Galvanized steel
Control system	Spraying, baking, time setting, lighting switch, power supply switch, emergency stop, all motors is normal start.
Total power	35.5KW (Power supply 1×220V, 3×380V, 50HZ)

Prep station:

Item	Detailed Specification
Inside	6300×3450×2650 mm (L×W×H)
Outside	7550×3550×3100mm (L×W×H)
Plenum	6300×3450×450 mm (L×W×H)
Room body	Back side EPS wall panel, the other sides PVC curtain.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated.
Generator cabinet	Exhaust from back side, galvanized steel frame; white machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system	1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper.
Purification system	Pre-filter, ceiling filter, fibreglass filter.
Roof	Galvanized steel
Control system	Fan switch, lighting switch, emergency stop.
Installs way	Supported by steel column.
Total power	6.7KW (Power supply 1×220V, 3×380V, 50HZ)