Economic Side Draft Standard Paint Booth Combined Mixing Room For Garage BY-1 non standard and BY-MR manufacturer from China Guangzhou Baoyue Electromechanical Equipment Co.ltd

Economic Side Draft Standard Paint Booth Combined Mixing Room For Garage

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: BY-1 non standard and BY-MR

Economic Side Draft Standard Paint Booth Combined Mixing Room For Garage

<p

Economic Side Draft Standard Paint Booth Combined Mixing Room For Garage

Features

Mixing room:

1, Axial fan for extraction only.

2, All panels are tongue and groove interlock structure.

3. Air units at back side.

4, 0.376mm color steel with EPS inside for wall panel.

5, All LED lights, energy save and more illumination.

6, Color white, blue, orange and red is optional.

7, 1 unit axial-flow fan for exhaust,air capacity: 5700m3/h.

Paint booth:

1. Each unit with one 5.5kw fan for intake and exhaust.

2. Quality brand turbo fans, directly drive type.

3. Diesel burner heating system.

4. Rear side draft air flow.

5, Led light and Scheider electric components.

Advantage:

The mixing room used for paint mixing, constitute by room body, exhaust system, filtering system.Can provide a good mixing environment for workers,in the mean time, make sure a pure paint mixed. Enough illumination for color mixing.

For paint booth, in painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,

symmetrical and steady-going down airflow for spraying,After painting, hot air goes from heating

generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. .

Item	Detailed Specification
Inside dimension	3450×2330×2350 mm (L×W×H)
Outside dimension	4130×2430×2400mm (L×W×H)
Emergency door	1 units, 650×1800mm (W×H), colour: white.
Wall panel&Roof	Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
Light	Ceiling Lights: 3Units×4Pcs=12Pcs×36W, no side lights, with electronic ballasts, lighting boxes are powered coated.
Exhaust system	Exhaust from the bottom of back side, air capacity: 7000m3/h.
Purification system	Pre-filter, fibreglass filter.
Control system	Fan switch, lighting switch, power supply switch.
Total power	1.2KW (Power supply 1×220V, 3×380V, 50HZ)

Below for paint booth:

Item	Detailed Specification
Inside dimension	6900×3900×2650 mm (L×W×H)
Outside dimension	8200×4000×3100mm (L×W×H)
Front door	Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour.
Emergency door	1 units, 650×1800mm (W×H), colour: white.
Basement	No, rear side draft.
Wall panel	Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×36W, no side lights, with LED, lighting boxes are powered coated.
Generator cabinet	Intake from back upper, exhaust from rear upper, galvanized steel frame; orange machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system	Inlet:1×5.5KW turbo fan, air capacity for each fan: 21000m³/h.
Intake and Exhaust system	Outlet: optional, 4m ducts, 1 pcs 90⁰ bend.
Heating system	BT18 diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 180000kcal/h, max temperature: 80, 4pcs chimney, 1 pcs bend.
Purification system	Pre-filter, ceiling filter, fibreglass filter.
Roof	Galvanized steel
Control system	Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, all motors is normal start.
Total power	7.5KW (Power supply 1×220V, 3×380V, 50HZ)