Inner Ramps Professional Waterborne Paint System Energy Saving CE TUV Certification BY-2 non standard manufacturer from China Guangzhou Baoyue Electromechanical Equipment Co.ltd

Inner Ramps Professional Waterborne Paint System Energy Saving CE TUV Certification

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: BY-2 non standard

Inner Ramps Professional Waterborne Paint System Energy Saving CE TUV Certification

&nb

Inner Ramps Professional Waterborne Paint System Energy Saving CE TUV Certification

Features

1. Infrared spray booth, don’t need a diesel as fuel ,only environmental infrared lamps for heating.

2. All panels are tongue and groove interlock structure

3. 8 units short wave infrared lamps for heating

4. Quality brand-name turbo fan fans

5. Water paint system on the ceiling.

6. Spray booth specific, dual voltage LED light fixtures

7. Inner ramps and drive through door.

8. Infrared fixed on wall, separate control, energy save.

Advantage

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,

symmetrical and steady-going down airflow for spraying,After painting, the infrared heating separate control to dry the item, until the temperature up to setting valve. Afterwards, the air with little benzene will be released to the atmosphere after being filtered by the air filter.

Item	Detailed Specification
Inside dimension	6900×3900×2650 mm (L×W×H)
Outside dimension	7000×5350×3400mm (L×W×H)
Front door	Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour. Anothe one at rear side, drive through.
Emergency door	1 units, 650×1800mm (W×H), colour: white.
Basement	Galvanized steel assemble, 300mm high, galvanized steel bending support, full grilles made by flat bar and twisted steel, silver, inner ramps.
Wall panel	Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×16W, no side lights, with LED, lighting boxes are powered coated.
Generator cabinet	Intake from side upper, exhaust from rear upper, galvanized steel frame; orange machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system	Inlet: 1×5.5KW turbo fan, air capacity for each fan: 18000m³/h.
Intake and Exhaust system	Outlet: 1×5.5KW turbo fan, air capacity for each fan: 18000m³/h, 4m ducts, 1 pcs 90⁰ bend.
Heating system	8 sets infrared heating, with magnetism sensor, 3PCS/set, 1KW/PCS, halogen tube, total power: 24KW, max temperature 80.
Purification system	Pre-filter, ceiling filter, fibreglass filter.
Roof	Galvanized steel, with 2 lines water base paint system on the ceiling, stainless steel nozzles, 2×0.75W motor.
Control system	Spraying, baking, time setting, lighting switch, thermostat, power supply switch, emergency stop, water base switch, all motors is normal start.
Total power	36KW (Power supply 1×220V, 3×380V, 50HZ)